Restore your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may require to reset your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the settings or are experiencing unexpected performance. Fortunately, resetting your Holosun is a simple process that can be performed in just a few steps.

• Initially ensuring your red dot sight is turned on.
• Identify the small reset button on the bottom of the device.
• Utilize a small object to depress the reset button for approximately 7 seconds.
• Release the switch and your Holosun EPS Carry Red Dot sight will power cycle.
• The red dot sight should now be set back to its factory settings.

Restore Your Holosun EPS Carry Red Dot toward Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to start fresh, resetting it to default configuration is a breeze. First, find the tiny button on the side of your optic. Then, keep pressed it for around five seconds until you see a brief flash. Your Holosun EPS Carry is now reverted to its factory settings, ready for precise aiming.

Bring Your Holosun EPS Carry Back to Action

Is your beloved Holosun EPS Carry experiencing some glitches? Don't despair! A simple factory reset can often fix the problem and get your red dot sight back to its former glory. Before you begin, remember to detach the battery from your Holosun EPS Carry to prevent unintended activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these easy steps:

• Simultaneously press and hold the power button for approximately 10 seconds.
• A message will flash, indicating that the reset is in progress.
• Let go of the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can insert the battery and test your sight's functionality. If you encounter any further difficulties, don't hesitate to seek help from Holosun's support.

Restore Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Follow these steps carefully to ensure a successful factory reset.

• Beginning with, Turn on your Holosun EPS Carry by pressing the power button.
• Subsequently, press and hold both the mode button and the up/down adjustment button simultaneously.
• During continue holding these buttons, tap the power button once.
• You will show a confirmation prompt indicating that the reset process is initiated.
• Enable the process to conclude. This may take a few moments. Once done, your Holosun EPS Carry will automatically shutdown.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Reset All Settings on Your Holosun EPS Carry

To Default reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Holding a specific button combination. Consult your Guidebook for the exact button sequence for your model. Once in the settings menu, look for an option that says "Clear Settings". Select this option and confirm the reset. Your sight will then power off and restart with all settings get more info Reinitialized to their default values.

Reset your Holosun EPS Carry through a Factory Default Settings

If your Holosun EPS Carry is acting funny, a factory reset might be the answer. This will return your sight to its original settings, clearing any altered configurations you've made. To execute this reset, follow these easy steps:

• Initially, identify the reset button on your EPS Carry.
• Then, press a fine object, like a pen tip, to activate the reset button.
• While hold the reset button pressed, power on your EPS Carry.
• You'll blink a message showing that the reset is complete.

When the reset is finished, your EPS Carry will be set to its factory settings.

Report this wiki page